Pay attention to some general safety requirements during elevator installation:
At the work site, preventive measures such as safety signs and warning signs should be established. For example, “No Entry”, “No Prohibition”, “No Smoking”, “Safety attention”, “Beware of Fall”, “Maintenance and Stop” are hanged at the main entrances and exits of the elevator. Use "safety marks"; set safety fences at construction sites and landing doors. If there is no cover, there must be someone to watch them, and no one else is allowed to enter.
Ensure that there is enough lighting in the workplace. The workplace should be kept clean and unobstructed; the materials must be stacked neatly, securely, and prevented from collapsing or entangled; the tarpaulin must be stored in a container at the designated location and periodically removed.
No loud, noisy, mischievous during work; no permission to drink during work or before work; no smoking at work; no vertical and multiple assignments.
The spirit of work should be concentrated, and when you feel that you are physically weak, you should ask for collaboration. Think about it before each operation and make sure that the operation is correct before operating.
When there is safety involved in the work, safety measures (such as safety switches, buzzers, walkie-talkies, etc.) must be in place before the safety of the other party is confirmed before operation and warning and monitoring. When two people work, they must cooperate. After the two parties call the reply instruction, they can operate.
Use the tool to have the correct posture and operate as specified. Be careful when transferring tools, materials, and parts. Do not throw. Disassemble the parts and put them in place to prevent injury. Parts and tools are not allowed to be placed on roadsides, brackets, scaffolding, or even on moving parts.
Beware of debris, protruding nails, and sharp objects during work to avoid injuries that are easily overlooked in the head or toes.
Personnel working alone or in a soundproof condition must remain in touch at all times. During work, you are not allowed to leave your position and enter dangerous places. If you leave or enter, you should make arrangements and confessions.
It is strictly forbidden to stand between the car door sill and the landing door sill. It is strictly forbidden to stand between the I-beam (channel steel) used to separate the hoistway and the car roof; it is forbidden to probe the door door, and to straddle the car outside the hoistway to the car top. Do not step on the rotating, moving parts and so on.
It is strictly forbidden to enter the elevator as soon as it is opened. It is necessary to see the position of the car to prevent it from falling. The car is not allowed to enter and exit.
It is strictly forbidden to short-circuit the internal and external door lock circuits and safety circuits of the elevators in operation. It is necessary to short-circuit during maintenance, to ensure that the internal and external doors have been closed, to prevent and monitor, to ensure safety, and to detach the short-circuit in time after completion of the operation.
The elevator is strictly prohibited from carrying cargo during maintenance and inspection.
When repairing, cleaning, and refueling the rotating parts and parts of the elevator, the elevator should stop running.
Always check the insulation and take care to avoid electric shock. Do not use live power unless necessary.
Before operating the printed circuit board, the operator should discharge the hand to the ground to prevent static damage to the electronic components. Do not plug and unplug the board with power.
AOYAMA ELEVATOR GLOBAL LTD.
Contact information in Japan
ADD: No. 17, Osukannon, Nagoya Southwest District, Aichi Prefecture, Japan
TEL: +81 52 4564462
The exclusive authorized exporter in China
JIAXING XIE ELEVATOR CO.,LTD.
Contact: Tony Yu
China address: No.2 TIAOLI UNIT, SHILANQIAO VILLAGE, HESHAN TOWN, TONGXIANG CITY, ZHEJIANG PROVINCE, CHINA